|
|
 |
| |
|
|
|
Effect of Cobalt Silicide Buffer Layer on Magnetic and Electrical Properties of Co Thin Films Deposited on Si, GaAs and Glass Substrates |
|
|
|
PP: 129-134 |
|
|
|
doi:10.18576/ijtfst/060306
|
|
|
|
Author(s) |
|
|
|
M. N. A. Siddiquy,
Nafisa Ahmed,
A. A. M. Rayhan Kabir,
Md. Johurul Islam,
|
|
|
|
Abstract |
|
|
| Cobalt silicide layers have been grown by E‒beam evaporation of Co onto Si (100) substrate and subsequent thermal treatment at 673K for 5 hours. A fresh layer of 100 nm Co is deposited on the silicide layer (sample‒1). A thin layer of 5 nm Co have been deposited on GaAs (100) substrate and annealed at 673K for 5 hours. A fresh layer of 100 nm Co is deposited on 5 nm annealed Co buffer layer (sample‒2). 100 nm Co films have been grown on glass substrate for comparison. Magnetic properties of Co thin films have been studied by Vibrating sample magnetometer (VSM). Measurements of magnetic properties show that the coercivity is 580 Oe for sample‒1. The coercivity of the sample‒2 is 240 Oe. The coercivity of 100 nm as-deposited Co films on glass substrate is only 50 Oe and the coercivity increases up to 100 Oe after annealing at 673K for 5 hours. Electrical measurements show that the Sample-1 is metallic in nature but the Sample‒2 is semiconducting in nature. In X-ray diffraction measurement, the Co films grown on n-GaAs and Si substrates exhibited a polycrystalline hcp structure. XRD study of Co thin films grown on glass substrate show a microcrystalline hcp structure. |
|
|
|
|
|
|
|
